Siemens WT7XH940GB Installation And Operating Instructions Manual page 62

Table of Contents

Advertisement

Appliance care
en
Press Quick Care .
5.
A message appears in the display.
Confirm the messages in the display.
6.
You can now run the appliance care
programme.
Call up the appliance care programme
as follows via the message:
After this appliance usage time,
Note:
the display automatically shows the
message: Quick Care should be
performed. Providing optimal drying
results every time. The total duration
will be ca. 40min.. You can call up the
basic appliance care programme via
this message.
Prepare the appliance for appliance
1.
care. ~ Page 60
Confirm the message in the display.
2.
You can also cancel the basic
Note:
appliance maintenance and
postpone it to a later time. This
message then reminds you to carry
out the basic appliance care
programme in its entirety.
You can now run the appliance care
programme.
Press § to return to the higher-
Note:
level screen.
62
Running the appliance care
programme
Run the appliance care programme as
follows:
Pour approx. 1 ^ litre of warm tap
1.
water into the condensation
container.
Hold the full condensation
Note:
container horizontally at all times so
that no liquid spills out.
Slide in the condensation container
2.
until it clicks into place.
Press ‹ (Start/Pause).
3.
The appliance care programme
starts and an audible signal sounds.
During the appliance care
Note:
programme, you cannot pause the
appliance via ‹ (Start/Pause).
A message appears in the display once
the appliance care programme has
ended, and an audible signal sounds.

Advertisement

Table of Contents
loading

Table of Contents