Advertisement
1 To open, hold the unit vertically, gripping the cover in one hand, and
the grinder in the other.
2 Turn the cover to move the pointer
3 Gently lift the cover off.
INSTALL BATTERIES FOR OPERATION
1 Fit 4 AA Alkaline batteries into the motor unit.
2 The polarities (+ and -) are marked on the battery compartment.
FILL THE GRINDER
1 Lift the motor unit off the grinder.
2 Fill the grinder with peppercorns, sea salt, dried herbs or spices.
3 Don't overfill, or it won't fit together.
4 Align the pointers
the padlocks
unit on to the grinder.
5 The spindle should slide easily into the centre of the motor unit.
6 Lower the cover on to the motor unit.
7 Align the pointer on the cover with the open padlock
push the cover down, then turn it to align the pointer
closed padlock
ADJUST THE GRINDER
1 Turn the whole mill upside down, and turn the knob right (-) until it
won't go any further.
2 Now turn it left (+) a little.
3 Turn the mill right way up, and press and release the switch.
4 Check the grind size, and adjust till it's the way you want it.
5 Don't turn it more than 6 complete turns towards +, or you may
unscrew the knob from the spindle.
6 Set the base down and sit the mill on the base.
GETTING TO KNOW YOUR
SALTON AUTOMATIC
SALT/PEPPER MILL
Your product may vary slightly
from illustration.
Cover P/N 71203
Motor Unit P/N 71204
Grinder P/N 71205
Base P/N 71206
OPERATING INSTRUCTIONS
on the bottom of the motor unit with
on the top of the grinder, and lower the motor
.
from
to
.
2
,
with the
Advertisement
