Advertisement
Quick Links
User manual
Model: DT-186
Product introduction
This product is an Anemometer Datalogger, which tests the air velocity of a particular place and records
32,000 readings at most, the measuring range is 1.1 to 20.0m/s, User can set up the sampling rate,
high/low alarm value and start mode and can also operate the software in windows 98, 2000, XP, vista or
win 7 system to download the data to PC by USB interface, then draws graphics by the data, realizing
print and data output function. The datalogger provides a lithium battery of one year's service life; its
function mode is indicated by red, yellow and green LED light flash.
Description
1.
Cover
2.
USB interface
3.
Button
4.
Indicator light
5.
Fan sensor
1
Advertisement
Related Manuals for CEM DT-186
Summary of Contents for CEM DT-186
- Page 1 User manual Model: DT-186 Product introduction This product is an Anemometer Datalogger, which tests the air velocity of a particular place and records 32,000 readings at most, the measuring range is 1.1 to 20.0m/s, User can set up the sampling rate,...
- Page 2 Features Memory for 32,000 readings Draw graphics curve by the data through the PC software Selectable sampling interval: 2s, 5s, 10s, 30s, 1m, 5m, 10m, 30m, 1hr, 2hr, 3hr, 6hr, 12hr, 24hr Operating status indicated by red, yellow and green LED light Data download to PC software by USB interface Too low/too high alarm value setup Two modes (manual and automatic) to start recording data...
- Page 3 LED status guide LEDs Indication No LED light flash -logging not active -wrong installment of battery One green flash every 10 seconds (20s or 30s) -logging, no alarm Green double flash every 10 seconds (20s or 30s) - manual mode to start logging(press yellow button, green and yellow lights flash, start logging) One red flash every 10 seconds (20s or 30s) -logging, low alarm for measurement value...