Advertisement
Overall Dimensions (H x W x D):
27.56" x 17.90" x 13.80"
(700mm x 455mm x 350mm)
Net Weight:
47 Lbs. (21.0 kg)
electronics AnD AMpliFier speciFicAtions:
Internal power amplifier (@120 VAC line):
450 watts peak available power
Continuous Power: 225 watts @ less than 3% THD
Electronic Input Impedance (Nominal):
Line: 22 k ohms balanced (XLR), 10 k ohms unbalanced RCA
Mic: 2.2 k ohms balanced (XLR) No phantom power available.
Input Sensitivity for Full Output (Level full CW):
Line Level – 0.36 V RMS
Mic Level – 0.02 V RMS
Tone Control Corner & Range:
Bass: +/- 12 dB, corner @ 550 Hz, Treble: +/- 12 dB, corner @ 1.0 kHz
Nominal Amplifier Frequency Response (before EQ):
+1, -3 dB from 20 Hz to 20 kHz
Hum and Noise:
Greater than 90 dB below rated power
THD and IM:
Typically less than 1 %
™
Power requirements of Peavey PBK15BT
System:
Nominal 130 Watts, 100-120 VAC 50-60 Hz
Fuse Type :
For 110-120 VAC USE: International fuse classification T3.15A cartridge-style 5 x 20 mm size fuses with a 250V
rating can be used.
For 220-240VAC USE: International fuse classification T2.0A . This is a cartridge style 5 x 20 mm size time-delay
fuse with a 2.0 amp 250V rating.
Features and specifications are subject to change without notice.
Peavey Electronics Corporation • 5022 Hartley Peavey Drive • Meridian • MS • 39305
(601) 483-5365 • FAX (601) 486-1278 • www.peavey.com • ©2013 • EX000181
Advertisement
