Download Print this page

Peavey PBK15BT Operating Manual page 5

Two-way powered sound reinforcement enclosure

Advertisement

USB CONTROL PANEL (14)
Controls the playback of MP3 files through the USB port
DISPLAY (15)
Digital display for USB MP3 functions
USB PORT (16)
For connection of a USB thumb drive for MP3 file playback.
DO NOT PLUG A USB CABLE FROM A COMPUTER INTO THIS PORT!
The PBK15BT
USB MP3 input, and/or the computer USB output can be damaged as a result.
s p e c i F i c A t i o n s
Frequency Range:
1 m on-axis, swept-sine in 1/2 Space environment, +/- 6dB:
54 Hz to 20 kHz
Nominal sensitivity (1W @1m, swept sine input in anechoic environment):
98 dB (average)
Maximum Sound Pressure Level (1 meter):
122 dB SPL peak with music
Transducer Complement:
Heavy-duty 15" woofer
14Ti
1.4" titanium diaphragm dynamic compression driver, mounted on a semi-exponential horn.
Nominal Coverage Pattern:
60 degrees horizontal by 45 degrees vertical
Electroacoustic crossover frequency:
2,700 Hz
Crossover type:
Internal passive two-way crossover with driver EQ, and level matching,
Crossover Slopes:
12 dB/octave (2nd order) low pass, 12dB/octave (2nd order) high pass, both with staggered poles and driver EQ.
Input Connections:
Line Level: One female XLR providing balanced line-level operation, and a pair of RCA phono jacks.
Mic Level: One female XLR and one 1/4" phone jack
USB Input Port: For connection of a USB thumb drive/memory stick for playback of MP3 music files.
DO NOT PLUG A USB CABLE FROM A COMPUTER INTO THIS PORT!
The PBK15BT USB MP3 input, and/or the computer USB output can be damaged as a result.
Output Connections:
One male XLR and one 1/4" phone jack. The Line Out jacks are intended for the use of linking multiple PBK15BT
in a line or to provide a feed to a powered subwoofer, or other electronics that needs to receive a full range
version of the input signal.
Enclosure Materials & Finish:
Black ABS plastic with textured surface, black powder-coated perforated grille.
Mounting or Suspension: Molded-in 1 3/8" pole-mount cup for stand mounting, four rubber feet for floor use.
NOTE: This unit is not designed for overhead suspension!

Advertisement

loading