Programming - Hatco 120 User Manual

HATO 120 / 200 SECTIONAL DOOR OPERATOR USER'S
MANUAL
Step 6
Fix the door bracket on the top edge of the door with bolts. Link the L arm to the door bracket
with pin and R pin. Link the straight arm to the shuttle with pin and R pin, ensure the door arm
can be moved freely.
Manual operation
If the door has to be operated manually due to a power cut or malfunction of the automated
system, pull the release rope, open and close the door manually. To reconnect the door, move
the door by hand until it engages into the chain shuttle.

6. Programming

SET button: Mode set and Confirm function
LEARN button: Transmitter set and clear function
UP button: Up limit
DOWN button: Down limit
Adding extra transmitter (learn)
1. Press and hold LEARN, a dot is indicated on the LED display.
2. Press the transmitter button which you want to use (button 1, 2, 4), then press the same
button again.
3. The dot on the LED display will flash then turn off.
Fig.10 Steel rail
Straight arm
L arm
Door bracket
Fig.11
Fig.12
9