Safety Instructions; Description And Features; Technical Specifications - Hatco 120 User Manual

Sectional door operator
Table of Contents

Advertisement

HATO 120 / 200 SECTIONAL DOOR OPERATOR USER'S
MANUAL

Safety instructions

1.
Carefully read and follow all safety precaution, warnings before attempting to install and use
this sectional door operator, incorrect installation can lead to severe injury.
The installation should be carried out by a qualified technician.
To avoid electrical shock, disconnect the power cord from the mains power outlet before
doing any repairs or removing the cover.
Before installing, make sure that the door is in good mechanical condition, the door must
be well balanced. Check that the door operates smoothly and easily.
Before installing the operator, remove all unnecessary ropes and disable equipment, such
as locks etc..
The garage door should only be used when in full view of the door.
No one or vehicle is allowed to enter or leave the garage while the remoter is being
installed, do not allow children to play near the door.
Locate any fixed control: within sight of door but away from all moving parts of the door
and at a height of more than 1.5m above the ground to avoid children reaching it.
Install and adjust the manual release so that the handle hangs less than 1.8m above the
floor.
Failure to comply with the instructions above may result in personal injury or property
damage. Our company does not accept responsibility for damage or injury resulting from
installing this operator.

2. Description and features

The garage door operator is designed for residential overhead sectional and tilt doors. It
operates on 240V AC.
The operator memorizes the limit positions and unique braking system that slows the unit
down at the end of its travel.
Smart controller and encoder system. Rolling code transmitter.
The operator is equipped with a manual release lever which allows manual operation of
the door in case of power failure.
The controller has a security LOCK function which prevents operation of the door from
transmitter.

3. Technical specifications

Model
Motor
Open & close force
HATO 120 / 200
24V DC 100W / 120W
600/1000N
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

200

Table of Contents