EIS-1, EIS-2, EIS-4
8.6 WIEGAND ACCESS
EIS unit has onboard support for 2 Wiegand output based device. With the use of external replicator
more Wiegand devices can be connected to the unit.
Configuration of first Wiegand interface is found in Digital interface tab.
can be found on board with a dedicated Wiegand connector and cables.
• Mode: Select appropriate data formatting (Advise unit provider for more info if needed,
mode 2 is most common setting)
• Facility code: User can Enable or Disable facility code field.
See Chapter
NOTE
of different data format options.
Second Wiegand interface is shared with alarm input lines, user must select Wiegand in Input
operation mode found in the Inputs tab.
Figure 9: WEB Server-First Wiegand interface support.
9-WIEGAND INPUT DATA FORMATs
Page 19
USER MANUAL
First Wiegand interface
for detailed explanation