Page 1
Please remove protective plastic cover from the products before installation. Your Air 4920 Triple Pack is pre-configured and pre-paired at the factory so they are ready to connect. Just wire them up as shown below and power them on:...
Page 2
If the 5GHz LED turns red, units are positioned too far apart or too many obstacles are present between the devices. Move your Air 4920 units closer to each other or realign to avoid obstacles. Connecting to your new Wi-Fi network: You can now connect to your new wireless network by referring to the Wi-Fi network name and Wi-Fi password printed on the underside of the Air 4920 devices.
Need help?
Do you have a question about the Air 4920 and is the answer not in the manual?
Questions and answers