Select Shock Setting; Setting Parking Brake - BOB REVOLUTION DUALLIE Owner's Instruction Manual

Tracking Knob
If Stroller Pulls RIGHT
If your stroller pulls RIGHT, turn
tracking knob clockwise up to one
half turn.
Tracking Knob
REPEAT roll test and adjust as
needed until stroller rolls straight.

SELECT SHOCK SETTING

1. Remove Children From Seat
2. Set Shock Setting To Position 2
Depress shock release knob and
simultaneously pull toward back of
stroller, sliding knob into position 2.
Knob will "snap" into place when in
correct position.
REPEAT on opposite side.
Position 1: Total combined occupant
weight 50 pounds
SNAP
Position 2: Total combined occupant
weight 51 to 100 pounds
SNAP
NOTE: Every time stroller is folded,
stroller shocks default to 50 lb position.

SETTING PARKING BRAKE

The parking brake prevents the
stroller from moving while loading
and unloading. The parking brake is
not designed as a stopping brake.
is not designed as a stopping
brake. The brake should not be
used to slow or stop the stroller
because doing so could cause the
stroller to stop abruptly, resulting
in loss of control.
50 lbs
100 lbs
51 lbs
The parking brake
OMA52B
13