Allen-Bradley E300 Installation Instructions

Installation Instructions
E300 Expansion Input/Output Modules
(Cat 193-EXP-DIO-42-120; 193-EXP-DIO-42-240; 193-EXP-DIO-42-24D; 193-EXP-AIO-31; 193-EXP-PS-AC; 193-EXP-PS-DC)
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of malfunction or
damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.
Additional Resources:
1) Go to http://www.literature.rockwellautomation.com;

Features

Panel Mount
Hole
DIN Rail Mount
Panel Mount Hole
Digital Expansion Module illustrated

Installation

E300
Removable I/O Terminals
Expansion Bus Out
Expansion Bus In
1
193-EXP-PS-_ _
2) Go to Search. Type in publication number: 193-UM015
Color
Off
Blinking Green
Green
Red

Digital Module Number Selector

Number
D1 - D4
D 3 D 4
D 2
T
D 4
D 1
3 T
T
T D
D 1
D 2
D1T - D4T expansion bus terminating
Note: If the expansion bus does not have an operator station, then the
last expansion module number must be set to terminated.
Click
2
193-EXP-DIO-_ _ _
193-EXP-AIO-_ _
Status LED
Description
No power applied
Module OK with no connection
Module OK and active
Error Detected
Analog Module Number Selector
Description Number
Module number A1 - A4
Module number with
A1T - A4T
resistor applied
193-EOS-_ _ _
Description
Module number
Module number with
expansion bus terminating
resistor applied