Download Print this page
Triad TS-PAMP8-100 Installation Manual

Triad TS-PAMP8-100 Installation Manual

4-zone and 8-zone power amplifier

Advertisement

Quick Links

TRIAD INSTALLATION GUIDE - 4-ZONE AND 8-ZONE POWER AMPLIFIER
INTRODUCTION
The Triad 4-Zone and 8-Zone Power Amplifers deliver high-performance,
reliability, and robust amplification in a compact form factor—providing the
perfect solution for distributed audio systems. Fast wake-from-standby
time and high-resolution audio quality output make this amplifier worthy
of any audio solution. Seamless integration with the Triad Audio Matrix
Switches and other Triad Power Amplifiers provides you with an easily
configurable, fully featured audio distribution solution for any size home.
SUPPORTED MODELS
• TS-PAMP8-100 Triad 8-Zone Power Amplifier
• TS-PAMP4-100 Triad 4-Zone Power Amplifier
BOX CONTENTS
• 4 or 8-Zone Power Amplifier
• IEC power cable
• Phoenix-style speaker connectors
• Rack-mount ears and screws
• Mono 3.5 mm 12V trigger cable
FEATURES
• Powerful amplification driven by ICEpower modules delivers a dynamic,
high-resolution audio experience
• Class-D amplification runs cool allowing you to stack one amplifier on
top of the other
• Bridgeable outputs provide double the amplification for areas that
require more amplifier power
• 1U height takes up half the rack space of other multi-room amplifiers
• Fast wake from standby using 12V trigger from Triad Audio Matrix
Switches—ideal for time-sensitive audio announcements and quick
audio zone turn on
• Standby mode saves energy by muting audio when not in use
• Three power control options—12V trigger, audio sensing, or always on
• Global input allows a single audio input to be linked to multiple
amplifier outputs with a simple dip switch
• Global output allows you to chain multiple amplifiers together to create
large audio zones
• Over-current protection prevents amplifier channels from overloading
due to short circuits or incorrect wiring
• Thermal protection shuts down amplifier channels if thermal limits are
exceeded, preventing damage
www.control4.com | 1-888-400-4072 | 200-00463-C 2018-02-15 DH
WARNINGS
WARNING! Do not expose the apparatus to dripping or splashing.
Do not place objects filled with liquids near the apparatus.
AVERTISSEMENT ! N'exposez pas l'appareil à l'égoutture ou à
l'éclaboussement. Ne placez pas les objets remplis de liquides près
de l'appareil.
WARNING! To reduce the risk of fire or electrical shock, do not
expose this apparatus to rain or moisture.
AVERTISSEMENT ! Pour réduire le risque du feu ou de choc
électrique, n'exposez pas cet appareil à la pluie ou à l'humidité.
IMPORTANT! Using this product in a manner other than outlined
in this document voids your warranty. Further, Control4 is NOT
liable for any damage incurred with the misuse of this product. See
"Warranty."
IMPORTANT ! Employer ce produit en quelque sorte autre que
décrit dans ce document vide votre garantie. De plus, Control4
n'est pas responsable d'aucun dommage encouru avec l'abus de ce
produit. Voyez que « garantie. »
IMPORTANT! Do not defeat the safety purpose of the polarized
or grounding-type plug. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
WARNING! To reduce the risk of fire, do not install this device in
a cabinet that is smaller than 20" (50.8 cm) wide × 20" (50.8 cm)
deep × 12" (30.5 cm) high. If you do, the device may overheat.
AVERTISSEMENT ! Pour réduire les risques d'incendie, ne pas
installer cet appareil dans une armoire qui est plus petit que 20"
(50.8 cm) de large × 20" (50.8 cm) de profondeur × 12" (30.5 cm)
de haut. Si vous le faites, l'appareil peut surchauffer.
FRONT AND REAR PANEL DESCRIPTIONS
FRONT PANEL 4-ZONE AND 8-ZONE AMPLIFIERS
A Zone Status LEDs—Lights blue when an amplifier zone is on, red if in
A
overcurrent protection, and orange if in thermal shutdown
• Power LED—Lights blue when amplifier powers on.
B
12V
ZONE INPUTS
AC POWER 100V-240V ~50-60Hz 105W
GLOBAL OUT
GLOBAL IN
TRIGGER
1
2
3
4
5
6
7
IN
L
BRIDGE
BRIDGE
BRIDGE
BRIDGE
BRIDGE
BRIDGE
BRIDGE
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
GAIN
OUT
R
FUSE RATING T6.3A_H 250V
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
CLIP
BACK PANEL 4-ZONE AND 8-ZONE AMPLIFIER
A
A
A
• Power connector—Use the supplied power cord to connect power.
• 12V TRIGGER IN/OUT— Trigger input for 12V control of amplifier power.
B
Connects to trigger output of audio matrix or other 12V trigger device.
Trigger output chains 12V control to another amplifier trigger input.
• GLOBAL OUT—RCA connectors for a global line-level stereo audio out.
C
Outputs whatever audio device is plugged into Zone 1 Input/GLOBAL IN.
• Zone 1 input/GLOBAL IN—RCA connectors for stereo line in. Can be
D
used as a global audio input or input for zone 1. GAIN dial is used to
adjust input level for zone 1 or global in. The recommended starting gain
level is 6. CLIP LED turns red when input gain is too high, causing the
amplifier zone to clip.
• Zone 2-4 (8) input—RCA connectors for stereo line in for zones 2-4 (8).
E
GAIN dial is used to adjust input level for each zone. The recommended
starting gain level is 6. CLIP LED turns red when input gain is too high
for each zone, causing the amplifier zone to clip.
• BRIDGE MODE—Set switches to On to bridge left/right amplifier
F
channels for a zone. When channels are bridged, use the RCA input
labeled BRIDGE.
• LINK TO GLOBAL INPUT—Set switches to On to link a zone to the
G
GLOBAL IN or set the ALL switch to On to link all zones to the GLOBAL
IN.
• POWER MODE—Set to ON/12V/AUDIO to configure the amplifier's
H
power setting.
• ZONE OUTPUTS—4 (8) stereo zone outputs using two 8 (16)-position
I
Phoenix-style connectors for speaker wiring connections.
A
B
PAMP4-100
Amplifier
A
B
PAMP8-100
Amplifier
8
L
BRIDGE
POWER MODE
1
2 3 4 5 6 7 8
ON
L
1
R
L
2
R
L
3
R
L
4
R
12V
L
5
R
L
6
R
L
7
R
L
8
R
GAIN
LINK TO GLOBAL INPUT
AUDIO
R
CLIP
ALL
2 3 4 5 6 7 8
12V
GLOBAL OUT
GLOBAL IN
ZONE INPUTS
F
TRIGGER
1
2
3
4
IN
L
L
BRIDGE
BRIDGE
BRIDGE
BRIDGE
POWER MODE
1
2
3
4
ON
L
1
12V
GAIN
GAIN
GAIN
GAIN
L
3
AUDIO
G
LINK TO GLOBAL INPUT
R
OUT
R
B
C
D
E
H I
CLIP
CLIP
CLIP
CLIP
ALL
2 3 4
F
G
B C
D
E
H I
R
L
2
R
R
L
4
R

Advertisement

loading

Summary of Contents for Triad TS-PAMP8-100

  • Page 1 • 1U height takes up half the rack space of other multi-room amplifiers • ZONE OUTPUTS—4 (8) stereo zone outputs using two 8 (16)-position • Fast wake from standby using 12V trigger from Triad Audio Matrix FRONT PANEL 4-ZONE AND 8-ZONE AMPLIFIERS Phoenix-style connectors for speaker wiring connections.
  • Page 2 TRIAD INSTALLATION GUIDE - 4-ZONE AND 8-ZONE POWER AMPLIFIER INSTALLING THE AMPLIFIER CONNECTING AUDIO INPUTS IMPORTANT! The common signal of these speaker outputs must not be connected together or to any other common signal. Do The 4-Zone and 8-Zone Power Amplifiers accepts stereo line-level audio not connect the L –...
  • Page 3 -4 °F ~ 158 °F (-20 °C ~ 70 °C) Copyright ©2018, Control4 Corporation. All rights reserved. Control4, the Control4 logo, Triad, and the Triad logo are registered trademarks or trademarks of Control4 Corporation in the United States and/or other countries. All specifications subject to change without notice.

This manual is also suitable for:

Ts-pamp4-100