Table of Contents
Advertisement
5.0
POWER SUPPLY CONTROLS INDICATORS AND REATURES
1.
Main Circuit Bleaker— Switching to the ON position energizes the welding power source.
2.
Fuse 8A
3.
Fuse 2A
4.
Fuse 2A
5.
Inductance Control (GMAW)
6.
Control Switch— 2T/4T.
7.
Gas Switch— Switching to the ON position activate the gas.
8.
Remote Control Switch— Switching to the ON position remote control start.
9.
Down Slope Voltage Control
10. Down Slope Wire Feed Speed Control
11. Voltage Control/ Amperage Control
12. Wire Feed Speed Control
13. Amp/ Voltage Digital display switch.
14. Volt Indicator— Voltage.
15. CPM Indicator— Wire feed speed.
16. Amp Indicator— Current.
17. Digital Meter
18. Warning Indicator— Activates under the following conditions:
19. AC Power Indicator— Lights when in the ON position.
DYNA POWER 350CV、503CV、500CV、630CV、630HCV Operating Manual
Figure 6 DYNA POWER series front panel
- 15 -
Advertisement
Table of Contents
