Weld Parameter Description - FCW DYNA POWER 503CV Operating Manual

3.02 Weld parameters description
Figure 4 DYNA POWER series front panel with parameter description
Parameter
Welding Voltage
Inductor
Burnback
Table 5 Weld parameter description for DYNA POWER series
DYNA POWER 350CV、503CV、500CV、630CV、630HCV Operating Manual
(DYNA POWER 500CV、630CV、630HCV front panel)
This parameter sets the welding voltage.
This parameter sets the electrode inductor.
MIG only. Burnback time is the difference between the wire feed motor stopping and
switching off of the welding current. The Burnback allows the electrode wire to burn
out of the molten metal weld pool, to separate the electrode wire from work piece.
Description
- 12 -