Ryobi CS30, SS30, BC30 Operator's Manual page 24

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.
PROBLEM
Spool retainer hard to turn:
Grass wraps around
driveshaft housing and string
head:
TROUBLESHOOTING
POSSIBLE CAUSE
1. Screw threads are dir ty or
damaged.
1. Cutting tall grass at ground level.
2. Operating trimmer at par t
throttle.
For any questions about operating or maintaining your trimmer, or brushcutte r
Your trimmer has been fully tested prior to shipment to ensure
Troubleshooting tips are also available in this operator's manual.
SOLUTION
1. Clean threads and lubricate with grease - if no
improvement, replace the spool retainer.
1. Cut tall grass from the top down to prevent
wrapping.
2. Operate trimmer at full throttle.
CALL US FIRST
call the Ryobi Help Line !
your complete satisfaction.
Page 24
®