5
6. SERVICE MODE
6.1 TEST MODE
1. How to start the test mode
1. Service Specification
1. When +Battery and ACC are ON, push RESET and EJECT buttons simultaneously.
2. Release RESET button only.
3. When "Password Entry Screen" is displayed, release EJECT button.
4. Enter the password.
5. If the correct password has been entered, the test mode menu will be displayed.
<< Password for the service >>
[8] → [1] → [8] → [3] → [7] → [2] → [0] → [8]
If 8 digits or more are entered and [ENTER] key is pressed, it will be treated as a password error.
• Password Entry Screen
• Password OK : After 2 seconds or so, the screen will automatically move on to the menu screen
• Password error: Nothing will be displayed, and reboot action will be taken.
5
6
AVIC-N4/XU/UC
6
7
7
8
A
B
C
D
E
F
75
8