Light Bar Color Codes; Rating Information - iDevices IDEV0001 User Manual

Light Bar Color Codes

MODE
Pairing Mode
Pairing
Pairing Expired
Pairing Restart
Wi-Fi Link Up
®
Wi-Fi Link Down
®
Factory Reset
Identify

Rating Information

UL Rated to UL STD 244A & STD 498A
Listing: E470483
Input: 125VAC, 60 Hz
Output: 125VAC, 60 Hz
Resistive: 1800W (15A)
Tungsten: 600W (5A)
Motor: 1/2HP
For use in dry, indoor locations only.
This product is not to be used by children or persons with reduced
physical, sensory or cognitive capabilities, or lack of experience and
6
DESCRIPTION
The accessory is waiting for the handset to configure the accessory's
Wi-Fi . The LEDs flash blue.
®
The accessory is waiting for the handset to initiate and complete pair
set up through either Wi-Fi
are solid blue.
Pairing mode has expired and the accessory is waiting for the user to
press the button for about 3 seconds to reenter pairing mode. The
LEDs slow flash blue.
To reinitiate the pairing mode, hold the button down for 3 seconds
and the LEDs will rapidly flash blue.
When the accessory joins a Wi-Fi
LEDs rapidly flash green for a second.
When the accessory has lost the connection to the Wi-Fi
(i.e., the link is down) the LEDs slow flash orange until the link is up.
To initiate a soft factory reset, which will clear all WiFi and pairing
information, hold the button down for 10 seconds until the LEDs
rapidly flash red. When the button is released the unit will reboot and
reenter the pairing mode.
When the accessory receives a request to identify itself, it rapidly
flashes purple.
or BLE (Bluetooth Low Energy). The LEDs
®
network, (i.e., the link is up) the
®
network,
®