Idevices ® Connected App; Connecting Your Switch - iDevices IDEV0001 User Manual

• The Switch will blink blue indicating it is ready to be set up
on the network
• An accessory (e.g. lamp, fan, etc.) can be plugged in at any time
• Pressing the button on the side of the unit will turn the Switch
on or off
iDevices Connected App
®
• Ensure your iOS device's Wi-Fi
your home Wi-Fi
• 2.4 GHz b/g/n networks are compatible
• 5 GHz networks are not compatible
• Download the free iDevices Connected app from the App Store

Connecting Your Switch

• Available devices will be shown at the top of the app
• If you don't see your device, check if the blue setup indicator
on the Switch is blinking fast or slow. If blinking slow, hold
button down for 3 seconds, release, and confirm fast blink.
• In the app, find the Switch you'd like to connect to and tap
the add icon
• Confirm your home network
• The Switch will turn solid blue to indicate it has successfully joined
your home network
• If this is your first HomeKit
creating a home and a room. If you already have a home set up, the
app will skip this step.
• To ensure the app is adding the correct product, the app will ask
you to confirm its identity. The LED on the Switch will blink purple to
indicate it is the new product being added.
• When prompted, enter the 8 digit pin previously noted on the
Quick Start Guide or back of the Switch. On iOS 9, you can scan
4
®
Network
®
product, the app will walk you through
™
is turned on and is connected to