Using The Adapter; Led Indication; Troubleshooting - TP-Link UE200 User Manual

Using the Adapter

Plug the adapter into the USB port. The automatic driver installation will
be completed within seconds, and then you can enjoy the Internet.
wired network
RJ45 Port
* For Windows, you may be prompted to install a driver, please click to install. For
Windows 7, if prompted "The program might not have installed correctly" after
driver installation, please click Cancel.
* For Mac OS X (10.10 and older),
Mac, please unplug the adapter and replug it. It is recommended to download and
install the latest driver to ensure the adapter can be permanently identi ed.
* For Mac OS 10.11, download and install the driver from our o cial website at
www.tp-link.com.
Appendix
LED
Status Indication
O The adapter is not connected.
On The adapter is connected to the USB port and wired network.
The adapter is transferring data.
Flashing

Troubleshooting

Q: What to do if I cannot connect to the Internet?
A1. Make sure the network adapter is connected properly and the LED is on.
A2. Download and install the compatible driver for your operating system from our
o cial website at www.tp-link.com.
A3. Contact our Technical Support if the problem still exists.
USB 2.0
if the adapter cannot be identi ed after you restart the
For more information, visit our website: www.tp-link.com
USB Port
computer
*