TP-Link UE200 User Manual

Usb 2.0 to 100mbps ethernet network adapter

Speci cations are subject to change without notice. TP-LINK is a registered

trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product

names are registered trademarks of their respective holders.

No part of the speci cations may be reproduced in any form or by any

means or used to make any derivative such as translation, transformation, or

adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.

www.tp-link.com

FCC & CE

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

CE Mark Warning

This is a class B product. In a domestic environment, this product

may cause radio interference, in which case the user may be required

to take adequate measures.

User Guide

USB 2.0 to 100Mbps Ethernet Network Adapter

Model No.UE200

7106505917 REV1.0.0

Table of Contents

Need help?

Do you have a question about the UE200 and is the answer not in the manual?

Page 1: User Guide
USB 2.0 to 100Mbps Ethernet Network Adapter Model No.UE200 COPYRIGHT & TRADEMARKS Speci cations are subject to change without notice. TP-LINK is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are registered trademarks of their respective holders.
Page 2: Troubleshooting
A1. Make sure the network adapter is connected properly and the LED is on. A2. Download and install the compatible driver for your operating system from our o cial website at www.tp-link.com. A3. Contact our Technical Support if the problem still exists. For more information, visit our website: www.tp-link.com...