Setup Instructions; Operating Instructions - General DTH04 User Manual

Jumbo display in/out temperature-humidity meter with clock

SETUP INSTRUCTIONS

Install Batteries:

1. Slide off cover of battery compartment on back of unit.

2. Install (2) included "AAA" batteries in compartment

in correct position.

3. Replace battery compartment cover.

ON/OFF:

1. Press ON/OFF button once to power on the meter

and press again to power it off. "WARM",

"COMFORT" or "COOL" appears at specific

combination of temperature and humidity.

°C/°F:

1. Press °C/°F button to select desired temperature

unit.

Max/Min:

1. Press MAX/MIN button once to recall maximum

temperature and humidity readings. MAX will appear

on the display.

2. Press button again to recall minimum temperature

and humidity readings. MIN will appear on the

display.

3. Unit reverts to real time mode automatically after

5 seconds.

Time Set:

1. Press and hold TIME SET button for 3 seconds.

Blinking digits on bottom readout means clock is in

set mode.

Table of Contents