Advertisement
2. Press HR and MIN buttons until the display shows
the current time.
3. Press 12/24 button to select time format.
4. Press TIME SET button to save setting and return
to real time mode. If button is not pressed within
5 seconds, unit will not save new setting and will
return to real time mode using previous setting.
In/Out:
1. Press IN/OUT button once to display outdoor
measurements. OUT will appear on the display.
2. Press button again to display indoor measurements.
IN will will appear on the display.
Alarm Set:
1. Press and hold AL/SNZ button for 3 seconds to enter
alarm set mode. AL will appear on the display.
2. Press HR and MIN buttons until display shows
desired alarm time.
3. Press TIME SET button again to save alarm setting
and return to real time mode. If button is not
pressed within 3 seconds, unit will not save new
alarm setting and will return to real time mode.
Snooze Set:
1. After setting alarm time, press AL/SNZ button to
activate the alarm and snooze function.
signs will appear on the display.
2. After alarm/snooze function is activated, the unit will
automatically return to real time mode in 3 seconds.
4
and SNZ
Advertisement
