Loose Parts And Tools Needed - Ryobi SC163VS Operator's Manual

LOOSE PARTS
Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.
• 3 mm T-Handle Hex Key
• 4 mm Hex Key
• Blade(s)
• Plastic Tubing
BLADE
4 mm HEX KEY
PLASTIC TUBING
3 mm T-HANDLE HEX KEY
Fig. 2
TOOLS NEEDED
The following tools (not included) are needed for adjustments and alignment:
• Combination Square
• Phillips Screwdriver
• Slotted Screwdriver
PHILLIPS SCREWDRIVER
COMBINATION
SQUARE
SLOTTED SCREWDRIVER
Fig. 3
Page 8