I Loose Parts And Tools Needed - Ryobi SC180VS Operator's Manual

Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.
I Blade(s)
I Operator's Manual (not shown)
The following tools (not included) are needed for adjustments and alignment:
I Combination Square
I Phillips Screwdriver
I Slotted Screwdriver
HEX KEY
SMALL
COMBINATION
SQUARE
LOOSE PARTS
PIN BLADE
TOOLS NEEDED
PLAIN BLADE
I Hex Key
I Adjustable Wrench
ADJUSTABLE WRENCH
PHILLIPS SCREWDRIVER
SLOTTED SCREWDRIVER
Page 8
Fig. 2
Fig. 3