Page 2
Table of Content Overview Control Panel Guide Maintenance Specification...
Page 3
Overview 1. Mode Indicator 2. IR Remote Receiver 3. Air Outlet Vent 4. Rolling Caster Wheels 5. Handle (one on each side) 6. Water level indicator 7. Air Filter 8. Power Cord 9. Ice Reservoir Lid 10. Remote Control Holder 11.
Page 4
Control Panel Fan Speed - The “SPEED” key is used to change the fan speed. The fan speed default is “Medium” and changes back to low within a few seconds. This helps with the stress of “Cold Start-Ups” which aids in longer motor life. Cool/Humidifier –...
Page 5
Guide 1. Open the package and take the unit out. Dispose of any foam packaging. 2. Adding Water: Open the door on the side of the unit to gain access to the water reser- voir. Add water until the water level is close to or has reached MAX. Pay attention to the following: 1) When adding water, pay attention to the water level indicator on the front of the unit.
Page 6
Guide 8. Ice Box – The ice box is a great way of cooling the outgoing air. It has the ability of keeping the ambient air a few degrees cooler. Operation 1) Put the Ice Packs into the freezer and keep them inside until they are completely frozen.
Page 7
Maintenance Air Filter – Unplug the unit before removing the air filter. Simply plug on the filter handle to remove the filter. Wash with a light soap and soft brush. Allow the filter to fully dry before using for maximum performance. Water Reservoir –...
Need help?
Do you have a question about the 048-GM-48161 and is the answer not in the manual?
Questions and answers