Gas Clip Technologies Multi Gas Clip Infrared Quick Start Manual
Hide thumbs
Also See for Multi Gas Clip Infrared:
- User manual (21 pages) ,
- Quick start manual (2 pages) ,
- User manual (25 pages)
Advertisement
Battery Information
Low Battery Warning: With 20 minutes of run time left the
detector will beep, flash & display "LOW BAT". These same
warnings will continue until the detector performs an automatic
shutdown once the battery expires.
Charging: While charging, the battery icon will cycle and the
detector will display an approximate charge percentage. Full charge
occurs in 4-6 hours.
DO NOT charge the instrument in a combustible atmosphere.
DO NOT charge the instrument in temperatures above or below
the specified range of 0°C to 40°C.
Additional Questions?
For additional information on the
regarding programing, calibration, etc. please refer to the
Multi Gas Clip User's
Manual. The manual and other helpful
videos & information are available for viewing or download at
www.gascliptech.com.
Contact Information
Gas Clip Technologies, Inc.
610 Uptown Blvd, Suite 4100
Cedar Hill, TX 75104 USA
Phone:
+1.972.775.7577
Fax:
+1.972.775.2483
Toll Free:
1.877.525.0808
E-mail:
info@gascliptech.com
Website:
www.gascliptech.com
Portable gas detectors you can count on
Multi Gas Clip
gas detector
MGC QSG v2
Portable gas detectors you can count on
Multi Gas Clip
Infrared
Quick-Start Guide
Multi Gas Clip
Pellistor
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gas Clip Technologies Multi Gas Clip Infrared
Summary of Contents for Gas Clip Technologies Multi Gas Clip Infrared
- Page 1 Multi Gas Clip User’s Manual. The manual and other helpful videos & information are available for viewing or download at www.gascliptech.com. Contact Information Gas Clip Technologies, Inc. 610 Uptown Blvd, Suite 4100 Cedar Hill, TX 75104 USA Multi Gas Clip Phone: +1.972.775.7577...
- Page 2 Turning On the Detector READ FIRST BEFORE OPERATION Press & hold down the button briefly to activate. Once activated, the Multi Gas Clip is a personal safety device designed to detect the detector will begin to display each sensor’s readings. A chasing “0” presence of hydrogen sulfide (H S), carbon monoxide (CO), oxygen indicates the sensor is stabilizing:...
Need help?
Do you have a question about the Multi Gas Clip Infrared and is the answer not in the manual?
Questions and answers