Download Print this page

Gas Clip Technologies Multi Gas Clip Infrared Quick Start Manual

Portable gas detectors
Hide thumbs Also See for Multi Gas Clip Infrared:

Advertisement

Quick Links

Battery Information
Low Battery Warning - With 20 minutes of run time left, the detector will
beep, flash and display "LOW BAT". Notifications will continue periodically until
the battery expires and the detector performs an automatic shutdown.
Charging - While charging, the battery icon will cycle and the detector will
display an approximate charge percentage. Full charge occurs in 4-6 hours.
For fastest charging, charge while detector is turned off.
Warning - DO NOT charge the detector in a combustible atmosphere.
Warning - DO NOT charge the detector in temperatures above 104°F (40°C)
or below 32°F (0°C).
Additional Questions?
For additional information on the
programing, bump testing, calibrating, etc. please refer to the
User's
Manual. The manual, videos and other helpful information are available
for viewing or download at www.gascliptech.com.
Contact Information
Gas Clip Technologies, Inc.
305 W. FM 1382, Suite 540
Cedar Hill, TX 75104 USA
Phone:
+1.972.775.7577
Fax:
+1.972.775.2483
Toll Free:
1.877.525.0808
E-mail:
info@gascliptech.com
Website: www.gascliptech.com
Portable gas detectors you can count on
Multi Gas Clip
gas detector regarding
Multi Gas Clip
MGC QSG v2.02
Portable gas detectors you can count on
Multi Gas Clip
Infrared
Quick-Start Guide
Multi Gas Clip
Pellistor

Advertisement

loading

Summary of Contents for Gas Clip Technologies Multi Gas Clip Infrared

  • Page 1 Multi Gas Clip User’s Manual. The manual, videos and other helpful information are available for viewing or download at www.gascliptech.com. Contact Information Gas Clip Technologies, Inc. 305 W. FM 1382, Suite 540 Cedar Hill, TX 75104 USA Phone: +1.972.775.7577 Multi Gas Clip Fax: +1.972.775.2483...
  • Page 2 Warning - If the display is missing icons, or cannot be clearly read, then shows “APPLY GAS”. Snap on the MGC calibration cap connected to a discontinue use and contact Gas Clip Technologies. hose, regulator and gas cylinder and apply gas. Calibration is complete when Warning - The IR LEL sensor will not detect hydrogen (H2) or acetylene the next calibration due date is displayed and the detector goes into alarm.

This manual is also suitable for:

Multi gas clip pellistor