Features; Unpacking - Ryobi RS2418 Operator's Manual

SPECIFICATIONS
Sanding Pad Length ....................................................................................................................................... 5 in. (127 mm)
No Load Speed .................................................................................................................................................... 12,500/min.
Diameter of orbit ......................................................................................................................................... 3/32 in. (2.5 mm)
Rating ............................................................................................................................. 120 Volts, 60 Hz, AC, 2.4 Amperes
Net Weight ................................................................................................................................................2.75 lbs. (1.25 kg.)
KNOW YOUR SANDER
See Figure 1.
Before attempting to use your sander, familiarize yourself
with all operating features and safety requirements.
SWITCH
This tool is equipped with a simple on/off switch control. (To
turn your sander ON, depress the switch button as shown in
Figure 1. Depress the switch button in the opposite direction
to turn your sander OFF).
The sander has a comfortable palm grip that provides easy
handling and positive control and is suitable for sanding with
coarse, medium, and fine grit sanding disc.
ON
0
I
SWITCH BUTTON
Carefully remove the sander, and accessories from box.
Make sure all items listed in the Packing List are included.
Do not discard the packing material until you have carefully
inspected and satisfactorily operated sander.
Examine all parts and accessories to make sure that no
breakage has occurred during shipping. Any damaged
part should be replaced before attempting to use the tool.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.

FEATURES

OFF
BACKING PAD
SANDING DISC

UNPACKING

CONVERSION PAD
Converts the standard sanding pad from use with pressure
sensitive sanding discs for use with velcro type sanding
discs.
RANDOM ORBIT
The random orbit motion provides overlapping sanding
movements by combining orbital and turning motion. These
overlapping sanding movements provide fast cutting action
with excellent sanding results.
DUST BAG ASSEMBLY
PACKING LIST
Sanding Disc (3)
Conversion Pad (for velcro type sanding discs)
Dust Bag Assembly
Warranty Card
Operator's Manual
WARNING:
If any parts are missing do not operate your tool until the
missing parts are replaced. Failure to do so could result
in possible serious personal injury.
Page 7
Fig. 1