Download Print this page

GOODWOOD AUDIO Bass Interfacer Manual

INTERFACER

THE

BASS

MANUAL

Table of Contents

Need help?

Do you have a question about the Bass Interfacer and is the answer not in the manual?

Page 1 INTERFACER BASS MANUAL...
Page 2 Do you like big bass? Are you all about the bottom line? Do you want to use effects on your bass without sacrificing what makes the bass, well, the bass? If so, The Bass Interfacer is what you need to get to the bottom of your tone issues. By creating parallel signal...
Page 3 “So what is this sorcery and how does it work?” We’re glad you asked. The Bass Interfacer has two loops, which we’ve called Clean and FX. The clean loop is where you set up your foundation tone. This is generally going to involved pedals like a preamp or eq, compressor and maybe a light overdrive and represents the full range of your instrument;...
Page 4 “Wow, that’s incredible. But what if I don’t have the option of running two amps or DIs?”. This is where the ‘Mix’ in ParaMix™ comes in. Press the white push button in and the FX loop is sent to the Clean output. Most importantly, still in parallel.
Page 5 Muting When an LED is on, that loop is muted. When both LEDs are on, no signal will leave The Bass Interfacer. This is perfect for tuning in silence. Configuration From the factory the Clean loop will not affect the FX loop.
Page 6 Specs Power: 2.1mm barrel, centre negative, 9vDC power only! Minimum 150mA Dimensions (incl. all jacks and switches): 73mm wide x 115mm deep x 68mm high Weight: 335 grams @goodwoodaudio info@goodwoodaudio.com...