Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Technical Pro LGSPOT18
Summary of Contents for Technical Pro LGSPOT18
- Page 1 User Manual Technical Pro LED Par Can with Power Linking MODEL: LGSPOT18...
- Page 2 Introduction Congratulations and thank you for your purchase of this Technical Pro LED Par Can. To get the most from your unit it is recommended that you review all of the information provided in this instruction manual before operating this equipment.
- Page 3 1. DMX Output (XLR): DMX (Digital Multiplex) is the form of communication between controller and fixtures. When linking multiple LGSPOT18 units simply connect the DMX OUTPUT to the DMX INPUT on the next unit. 2. LED Display Screen: The LED display screen will show the settings information.
-
Page 4: Operating Modes
AC Power Cord Connection: To connect the power cord to the LGSPOT18 plug the female side of the power cord into the power cord input which is on the rear of the unit. Then plug the male side of the power cord to an electric outlet. When linking LGSPOT18 units to each other connect the power output on the first unit to power input on the next unit. - Page 5 – d512 to determine the address of the respective LGSPOT18. For example, setting a LGSPOT18 to d001 will allow the DMX controller to set the Red, Green and Blue settings by making adjustments on the CH1, CH2 and CH3 settings of the DMX controller.
- Page 6 LGSPOT18 7 Channel Mode: When using the LGSPOT18 together with a DMX controller, set the LGSPOT18 to one of the settings to determine the address of the respective LGSPOT18. For example, setting a LGSPOT18 to A001 will allow the DMX controller to set the Dimming, Red, Green, Blue, flash, color changing and speed by adjusting the settings of CH1, CH2, CH3, CH4, CH5, CH6 &...
Need help?
Do you have a question about the LGSPOT18 and is the answer not in the manual?
Questions and answers