Download Print this page

Technical Pro LG46 User Manual

Multi color stage effect light

User Manual for:

Multi Color Stage Effect Light

MODEL: LG46

Table of Contents

Need help?

Do you have a question about the LG46 and is the answer not in the manual?

Page 1 User Manual for: Multi Color Stage Effect Light MODEL: LG46...
Page 2 Introduction Congratulations and thank you for your purchase of this Technical Pro LED stage effect light. To get the most from your unit it is recommended that you review all of the information provided in this instruction manual before operating this equipment.
Page 3 LG46 LG46 Rear Panel 1. Light Change Speed: This knob can used to adjust the speed at which the light change colors. 2. Sensitivity knob: This knob used adjust the sound sensitivity of the fixture’s motor. If set to maximum, the motor will rotate along with sound, if set to minimum, the motor will be fixed.
Page 4 Always connect the fixture to a circuit with a suitable electrical ground. To connect the power cord to the LG46 plug the female side of the power cord into the power cord input which is on the rear of the unit. Then plug the male side of the power cord to an electric outlet. When linking LG46 units to each other connect the power output on the first unit to power input on the next unit.