Table of Contents
Advertisement
MicroBio Operating Manual [P0001W006]
Total Volume Count
This displays the total litres of air the MB2 has taken since the last factory reset. This figure is useful
for the manufacturer's maintenance and reliability statistics, and may also be used as an indicator for
the user's regular calibration regime.
Total Samples Taken
This is a count of how many samples have been taken by the MB2 since the last factory reset.
This figure is useful for the manufacturer's maintenance and reliability statistics and may also be
used as an indicator for the user's regular calibration regime.
Unit Version
This displays the hardware and software revision information for the MB2.
It is used by the
manufacturer for repair and maintenance purposes. The software in the MB2 cannot be upgraded
by the user.
Restore Factory Defaults
When Unit Status mode has been selected, it is possible to perform a factory reset on the MB2 by
holding down the
+
and
-
buttons simultaneously. The display will show on the top line
** UNIT
RESET
** with a row of dots appearing on the bottom line. When sixteen dots appear, the MB2 will
restart itself.
This has the effect of restoring all factory defaults to the pre-set user volumes and zeroing the
samples taken and total volume counts.
June 2012
9 / 16
Advertisement
Table of Contents
