Table of Contents
Advertisement
Warranty
The manufacturer warrants this product to be free from defects in materials and workmanship for 12
months from the date of purchase. Your local distributor may offer extended warranties in addition to
this period.
If your product is found to be defective within that period, please contact your local distributor who
will arrange for repair of the instrument, or if necessary a replacement.
This warranty does not cover accidental damage, wear and tear, consequential or incidental loss.
The warranty excludes rechargeable batteries supplied with the sampler. Damage caused by use of
cleaning materials not recommended by the manufacturer will void the warranty. Any use beyond
the specification of the unit will void the warranty. Any modifications to the unit without permission or
advice from the manufacturer will void the warranty.
This warranty does not affect your statutory rights.
Notes on using this manual
Operating instructions that follow colour to indicate the following:
RED!
:!
Control panel button
BLUE! :!
Display window message
Sampler Operation
Both MB1 and MB2 models are easy to use hand held instruments.
The MB1 may be hand held or placed on a surface.
The MB2 may be hand held or mounted on a tripod at any height.
Installing Battery
The batteries are held in a small compartment at the back of the MicroBio. The unit is supplied with
4 x AA NiMH high capacity cells. The user can replace these at any time with similar NiMh, NiCd, or
even non-rechargeable Alkaline Batteries. The batteries are removed for re-charging in the "plug in
the wall charger" supplied.
DO NOT ATTEMPT TO RECHARGE ALKALINE BATTERIES
When the batteries need re-charging the display will show the words LOW BAT when the unit is first
switched on.
We do NOT recommend the use of Zinc-Carbon Batteries.
discharged state in the battery compartment and can cause corrosion, which can damage the
printed circuit board. We also recommend that batteries are removed from the unit if it is to be left
unused for extended periods to avoid corrosion.
Ensure any cells used are designed for high drain applications.
NOTE: Please read instructions for the supplied charger before charging the NiMh cells.
June 2012
MicroBio Operating Manual [P0001W006]
using the supplied charger.
These can leak and when left in a
5 / 16
Advertisement
Table of Contents
