Table of Contents
Advertisement
QUESTION
Adapter didn't work
No sound or sound
distorted?
The icon ( ) appears on
the screen?
Picture is distorted?
Can not forward or reverse?
IR sensor inoperative?
Disc can not play?
Just start playing then
stopped immediately?
Change the Remote Control Battery
1. Open the Battery Door.
2. Insert one CR2025 size battery.
3. To use the remote control, point it at the remote sensor on the player.
TROUBLESHOOTING
ANSWER
1. Please check that if the power supply is working normally.
2. Ensure that the red status indicator on, change the adapter if not.
Make sure your DVD is connected properly. And all cables are securely inserted
into the appropriate jacks.
The feature or action cannot be completed at this time because:
1. The disc's software restricts it.
2. The disc's software doesn't support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You've requested a title or chapter number that is out of range.
1. The disc might be damaged. Try another disc.
2. It is normal for some distortion to appear during forward or reverse scan.
1. Some discs have sections that prohibit rapid scanning or title and chapter
skip.
2. If you try to skip through the warning information and credits at the
beginning of a movie, you won't be able to. This part of the movies often
programmed to prohibit skipping through it.
1. Ensure that the batteries in the remote are fresh.
2. Ensure that the remote sensor eye is not obstructed.
3. Ensure that the infrared transmitter is affixed over the sensor eye of the
component to be controlled.
1. Please use regular disc.
2. Insert a disc with the label side facing up.
3. Check the type of disc you put into disc tray. This DVD only plays digital
video discs, audio CDs and MPs.
1. The disc is dirty. Clean it.
2. Condensation has formed. Allow player to dry out.
Advertisement
Table of Contents
