Shuttle K45 Quick Manual

K45 Barebones Quick Guide 【 English 】
Front panel
F1. Power Switch
F2. Power LED
F3. HDD LED
F3
F1
F2
Back panel
B1. AC Power Socket
B2. PS/2 Mouse Port
B3. PS/2 Keyboard Port
B4. COM Port
B5. Parallel Port
B6. VGA Port
B1
B7. USB Port
B8. LAN Port
B8
B9. MIC-In Port
B10. Front-Out (L/R) Port
B2
B11. Line-In Port
B3
B4 B5 B6 B7 B9 B10 B11
Mainboard illustration
LAN & USB2.0 (x2) Ports
Line-In/Front-Out/MIC-In Ports
Front Panel Connector- JP8
C1
FAN Connector- FAN2
C2
One PCI Slot (Optional)
USB Headers- USB3 ,4
C3
Clear CMOS Header- JP9
C4
ICH7 Chipset
BIOS Connector
C5
Serial ATA- SATA 1,2
Power Connector- JP5
C6
One IDE Slot- IDE1
Jumper Settings
Front Panel Connector
C1
Pin Assignments (JP8):
1=MIC2_L
2=AGND
3=MIC2_R
4=FRONT CTL
5=LINE2-R
6=SENSE1_RETURN
7=FRONT_SENSE
8=NC
9=LINE2-L
10=SENSE2_RETURN
Fan Connectors
C2
FAN1/FAN2
USB Connectors
C3
Pin Assignments (USB3):
1=USBPW3
2=USBPW3
3=USBP2N
4=USBP3N
5=USBP2P
6=USBP3P
7=GND
8=GND
9=KEY
10=GND
Pin Assignments (USB4):
1=USBPW4
2=USBPW4
3=USBP6N
4=USBP7N
5=USBP6P
6=USBP7P
7=GND
8=GND
9=KEY
10=GND
Clear CMOS Header
C4
Pin1-2 (Default)
Pin Assignments (JP9):
1=RTC_RST-
2=-RTCRST
USB2.0 (x2) Ports
3=-RTCBTN
Parallel & COM & VGA Ports
PS/2 K/B & M/S Ports
BIOS Connector
C5
Pin Assignments:
1=SPI_CS0-
2=SPI_MISO
ITE 8718F-S Chipset
3=SPI_WP-
FAN Connector- FAN1
4=GND
C2
5=SPI_MOSI
6=SPI_CLK
7=SPI_HOLD-
8=SPI_VDD
LGA775 Package CPU Socket
Power Connector
C6
ATX Power Connector- ATX1
Pin Assignments (JP5):
Intel 945GC Chipset
1=HDLED_PU
2=GRNLEDA
3=-HD_LED
4=GRNLEDB
ATX Power Connector- ATX2
5=BT_SEL
6=-PWRSW
7=GND
Two 240 pins DDR2 DIMM Slots
8=GND
9=NC
10=KEY
A. Begin Installation
Note: For safety reasons, please ensure that the power cord is
disconnected before opening the case.
1. Unscrew 3 thumbscrews of
the chassis cover.
2 4 6 8 10
2. Slide the cover backwards and upwards.
1 3 5 7 9
2
PWM_CRTL
SPEED_SENSE
+12V
B. CPU Installation
Ground
Note: If your xpc has ICE TM Cooling Module ( for K45B, K45W,
K45L, K45R models only ), proceed to step1~3.
Remove the ICE TM Cooling Module first.
TM
1. Unfasten the ICE Cooling Module thumbscrews on the back of the
chassis.
USB3
TM
2. Unfasten the four ICE Cooling Module attachment screws and
unplug the fan connector.
USB4
Fan Connector
3. Remove the ICE TM Cooling Module from the chassis and put it aside.
4. First unlock and raise the socket lever, lift the metal load plate on the
CPU socket.
Pin2-3 (Clear CMOS)
Note: This 775 pin socket is fragile and easily damaged. Always use
extreme care when installing a CPU and limit the number of
times that you remove or change the CPU.
2
1 8
2 7
3 6
4 5
1
5. Orientate the CPU and socket, aligning the yellow triangle on the
cornerof the CPU with the triangle on the socket. Making sure the
CPU is perfectly horizontal, insert the CPU into the socket. Close
the load plate, lower the CPU socket lever and lock in place.
6. Remove the protective socket cover.
L The product's color will depend upon the actually shipping product.
LGA775 Processor
Lever
Triangle Markings
Note: Failure to correctly align the CPU and socket can result in
damage to the CPU.
7. Spread an even layer of thermal
compound on the CPU die.
1
Note: Please do not use too much Heatsink compound.
C. FAN Installation
Note: If you are installing the Intel CPU FAN, proceed to step1.
If you are installing the ICE TM Cooling Module (for K45B,
K45W, K45L, K45R models only), proceed to step2~4.
1. Screw the Intel CPU FAN to the mainboard and connect the fan
connector.
1
Fan Connector
4
Note: Please refer to the user guide of the Intel CPU FAN you bought
to install the fan.
2. Screw the ICE TM Cooling Module to the mainboard. Note to press down
on the opposite diagonal corner while tightening each screw.
3. Connect the fan connector.
1
Fan Connector
4
TM
4. Fasten the ICE Cooling Module to the chassis with the 4 thumbscrews.
D. DDR2 Installation
1. Unlock the DIMM latch.
2. Align the DDR2 module's cutout with the DIMM slot notch.
Slide the DDR2 module into the DIMM slot.
Cutout
Notch
Latch
3. Check that the latches are closed, and the DDR2 modules are firmly
installed.
Note: Repeat to install additional DDR2 modules if desired.
E. HDD Installation
1. Slide the hard disk drive (HDD) into the chassis.
2. Fasten the four side screws.
Note: Please make sure to secure the screws on each side.
3. Plug the Serial ATA cable to the SATA1/SATA2 header.
3
4. Connect the Serial ATA and power cables to the HDD.
2
Serial ATA Cable
Serial ATA Power Cable
F. Accessories Installation
3
1. Unfasten expansion slot bracket screws.
Remove the back panel bracket and put the bracket aside.
2
PCI slot
2. Install the PCI card into the PCI slot (Optional).
3. Secure the bracket.
G. Complete
1. Replace the cover and refasten the thumbscrews.
Latch
2. Complete.
Note: Please load the optimized BIOS values.
PAR-MA3140-H007