Backup Of Psw-Uacm Configuration Database; Moving The Psw-Uacm Installation To A Different Machine - ProSoft PLX32-EIP-MBTCP-UA User Manual

OPC UA Server
User Manual

7.12.5 Backup of PSW-UACM configuration database

The PSW-UACM configuration database is located in the
C:\ProgramData\Prosoft Technology\OPC UA Server Configuration Manager
folder. In order to create a backup copy, close PSW-UACM, and copy the folder
content into a backup destination.

7.12.6 Moving the PSW-UACM Installation to a Different Machine

A single installation of the PSW-UACM must be used to configure all
MBTCP-UA devices. This setup will not work if another copy of the PSW-UACM
is installed on another PC. If PSW-UACM must be migrated to another PC, then:

Create a backup of the PSW-UACM database as described in Section
7.12.5.

Install PSW-UACM on another PC

Restore backup files on the PC into the C:\ProgramData\Prosoft
Technology\OPC UA Server Configuration Manager folder
(PSW-UACM must be closed during restore).
Page 150 of 156
PLX32-EIP-MBTCP-UA ♦ Multi-Protocol Gateway
ProSoft Technology, Inc.
PLX32-EIP-
March 8, 2018