Product Specifications; Unpacking; Applications - Ryobi HPL51 Operator's Manual

Input 120 Volts, 60 Hz, AC only, 5 Amps
No Load Speed
Maximum Planing Depth
Maximum Planing Width
Maximum Rabbet Depth
INSTRUCTIONS
Your power planer has been shipped completely
assembled.
Carefully remove the tool and the accessories from
the box.
Make sure that all items listed in the packing list are
included.
Inspect the tool carefully to be sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
tool.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
You may use the power planer for the purposes listed below:
Planing the surface of a piece of lumber.
Planing the edge of a piece of lumber.
Making rabbet cuts in a piece of lumber.

PRODUCT SPECIFICATIONS

16,000/min
3/32 in. (2.4 mm)
3-1/4 in. (82 mm)
7/16 in. (11.1 mm)

UNPACKING

APPLICATIONS

Page 7
Blades Rapid Set™ Double-Edged Carbide (2)
Weight
Cord length
PACKING LIST
Power planer
Blades (two extra blades)
Blade Wrench
Edge/Rabbet Guide Kit
Dust Bag
Case
Operator's Manual
WARNING:
If any parts are missing, do not operate your tool
until the missing parts are replaced. Failure to do so
could result in serious personal injury.
6 lbs. (2.7 kg.)
10 ft. (3 m)