Symbols - Ryobi HPL51 Operator's Manual

WARNING:
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
lead from lead-based paints,
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out microscopic particles.
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Alternating Current
n No Load Speed
0
Class II Construction
/min Per Minute
Safety Alert
Eye Protection
Wet Conditions Alert
SPECIFIC SAFETY RULES

SYMBOLS

DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc. per minute
Precautions that involve your safety
Always wear safety goggles or safety glasses with side shields
and a full face shield when operating this product.
Do not expose to rain or use in damp locations.
Page 5