Makita DCL142 Instruction Manual page 5

2
1
3
1. OFF button 2.
power lamp 4. Lamp
button. To turn off the lamp, press the "OFF" button.
Indicating the remaining battery
capacity
Only for battery cartridges with the indicator
1. Indicator lamps 2. Check button
cate the remaining battery capacity. The indicator lamps
light up for few seconds.
Indicator lamps
Lighted Off
4
3. Battery
1
2
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Battery power lamp
1
1. OFF button 2.
power lamp
battery power lamp blinks.
lower, the tool stops during operation and the bat-
tery power lamp lights up for about ten seconds.
At this time, remove the battery cartridge from the
tool and charge it .
NOTE:
blinking or lighting up depends on the tempera-
ture at work place and the battery cartridge
conditions.
ASSEMBLY
-
CAUTION:
the battery cartridge is removed before carrying
out any work on the tool.
Disposing of Dust
CAUTION:
the suction force weakens.
itself. Failure to do so may cause the sponge
should be used whenever either the dust bag or
the paper pack is used.
5 ENGLISH
2
3
3. Battery