Allen-Bradley E300 Installation Instructions And Operators Manual

Installation Instructions
E300 / E200 Operator Stations
(Cat 193-EOS-SCS; 193-EOS-SDS)
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from contaminants.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of practice. In case of
malfunction or damage, no attempts at repair should be made. The product should be returned to the manufacturer for repair. Do not dismantle the product.
Additional Resources:
1) Go to http://www.literature.rockwellautomation.com;
Features
Power LED
Trip / Warn LED
Start Forward / Speed 1
Start Reverse / Speed 2
Local / Remote
Installation
1
1
3
Stop
Reset
193-EOS-SCS
2
For use on a flat surface of a Type 4X Enclosure
1
2) Go to Search. Type in publication number: 193-UM015
Power LED
Trip / Warn LED
Start Forward / Speed 1
Start Reverse / Speed 2
Local / Remote
193-EOS-SDS (Requires control module firmware v3.000 or higher)
2
1.7 N . m
(15 lb-in)
Click
2
Escape
Up
Select
Stop
Reset
800F-AW2
Enter
Down