Removing The Dryer Heater - Bosch WKD28350GB Repair Instructions

5.7

Removing the dryer heater

5.7.1 Removal
1. Remove VDE cover
2. Remove upper cross-bar
3. Remove heating duct cover
4. Loosen cable connections. Pay attention to the plug
assignment for subsequent installation!
RD1 CNM3
1
RD2 CNM1
2
RD1 THS/RD2
3
RD2 THS/RD1
4
5. Remove heater holder
815_58300000146136_ara_en_b.doc – 12.04.10
5.7.2 Installation
1. Renew seals.
2. Install heater with heater holder
3. Connect cable connections. Ensure the plug-in connections
are connected correctly
4. Attach heating duct cover
5. Attach upper cross-bar
6. Attach VDE cover
Seite 28 von 32