5.6
Removing the fan
5.6.1
Removal
1.
Remove VDE cover
2.
Remove supply hose. Alternatively the valve block can also be
detached
In Aquastop models the hose is secured with a Torx
20 with safety pin!
Torx 20 with safety pin
1
3.
Remove back cross-bar
4.
To do this, detach hose connections and electrical
connections. The cross-bar cannot be removed backwards
until all screws have been loosened
5.
Remove upper cross-bar
815_58300000146136_ara_en_b.doc – 12.04.10
6.
Remove heating duct cover
7.
Remove the fan
Back cross-bar
1
Upper cross-bar
2
Heating duct cover
3
Fan
4
Seite 26 von 32