Device Description; Installation - Kärcher SC 5 EasyFix Premium Operating Instructions Manual

Device description

The maximum amount of equipment is described in
these operating instructions. Depending on the model
used, there are differences in the scope of delivery (see
packaging).
For the figures, refer to the graphics page.
Illustration A
Unit plug with cover
1
Water reservoir
2
Carrying handle for the water reservoir
3
Selector switch
4
Control panel
5
Display - OFF position
6
Display - water shortage (red)
7
Display - heating (green)
8
Min. steam stage
9
Steam setting selection range
10
Max. steam stage
11
VapoHydro function steam stage
12
Cap for accessory compartment
13
Maintenance lock
14
Carrying handle
15
Holder for accessories
16
Accessory storage compartment
17
Mains connection storage compartment
18
Park bracket for floor nozzle
19
Mains connection cable with mains plug
20
Non-driven wheels (2 x)
21
Steering roller
22
Steam gun
23
Steam lever
24
Unlocking button
25
Child lock
26
Steam hose
27
Steam connector
28
Spotlight nozzle
29
Round brush (small)
30
**Power nozzle
31
**Round brush (large)
32
Manual nozzle
33
Manual nozzle microfibre cover
34
Extension tubes (2 x)
35
Unlocking button
36
Floor nozzle
37
Hook and loop fastener
38
Microfibre floor cloth (1 x)
39
10
**Microfibre floor cloth (2 x)
40
**Carpet glider
41
Descaler
42
**Steam pressure iron
43
**Steam switch (bottom)
44
**Indicator light (orange) - heating
45
**Steam switch (top)
46
**Lock for steam switch
47
**Temperature controller
48
**Steam connector
49
**Optional
Installing accessories
1. Open the cover on the device socket.
Illustration B
2. Connect the steam connector to the device socket
so that the steam connector audibly engages.
Illustration B
3. Push the open end of the accessory onto the steam
gun so that the unlocking button on the steam gun
engages.
Illustration H
4. Push the open end of the accessory onto the spot-
light nozzle.
Illustration I
5. Connect the extension tubes with the steam gun.
a Push the first extension tube onto the steam gun
so that the unlocking button on the steam gun en-
gages.
The connection pipe is connected.
b Push the second extension tube onto the
first extension tube.
The connection pipes are connected.
Illustration J
6. Push the accessory and / or the floor nozzle onto the
free end of the extension tube.
Illustration K
The accessory is connected.
Disconnecting accessories
1. Set the child lock to the rear.
The steam lever is locked.
2. Push the cover on the device socket down and dis-
connect the steam connector from the device sock-
et.
3. Push the unlocking button and pull the parts apart.
Illustration P
English

Installation