Talking And Listening; Talk Range; Monitor Button; Push-To-Talk Time-Out Timer - Motorola Talkabout T62 Owner's Manual

Talking and Listening

All radios in your group must be set to the same channel and
Sub-Code in order to communicate.
1. Hold your radio 2–3 cm from your mouth.
2. Press and hold the PTT button while speaking. The
Transmit icon appears on the display.
3. Release the PTT button. You can now receive incoming
calls. When you do, the Receive
display.
For maximum clarity, hold the radio 2 to 3 cm away and
avoid covering the microphone while talking.

Talk Range

Your radio is designed to maximize performance and
improve transmission range. Ensure the radios are at least 5
feet apart when in used.

Monitor Button

Pressing and holding Scan/Monitor for 3 seconds to enter
Monitor mode and listen for weak signals on the current
channel. You can also listen to the volume level of the radio
when you are not receiving. This allows you to adjust the
volume, if necessary.

Push-to-Talk Time-out Timer

To prevent accidental transmissions and save battery life,
the radio emits a continuous warning tone and stops
transmitting if you press the PTT button for 60 seconds
continuously.

Menu Options

Note: *Only Channels 1 to 8 are available by default. Channels 9 to 16
need to be activated by user before they can be selected.
Channels 9 to 16 should only be used in countries where these
frequencies are allowed by government authorities. Channels 9 to
16 are not allowed in Russia.
icon appears on the
Two Way Mode
Menu Key
Channel (1-8 / *1-16)
Menu Key
Sub-Code (0-121)
Menu Key
Call Tone (Off, 1-20)
Menu Key
Internal Voice Operated Transmission/
Voice Operated Transmission
(iVOX,VOX) (Off, L1,L2,L3)
Menu Key
Dual Channel Monitor Channel (1-8 / *1-16)
Menu Key
Dual Channel Monitor Sub-Code (0-121)
Menu Key
Keypad Tones (On/Off)
Menu Key
Roger Tones (On/Off)
Menu Key
5