Advertisement
SAFETY PRECAUTIONS
READ SAFETY PRECAUTIONS BEFORE INSTALLATION
To prevent injury to the user or other people and property damage, the following instructions must be followed.
Incorrect operation due to ignoring of instructions may cause harm or damage. The seriousness is classified by the
following indications.
THIS SYMBOL INDICATES THAT IGNORING INSTRUCTIONS MAY CAUSE
DEATH OR SERIOUS INJURY.
THIS SYMBOL INDICATES THAT IGNORING INSTRUCTIONS MAY CAUSE
MODERATE INJURY TO YOUR PERSON, OR DAMAGE TO YOUR UNIT OR
OTHER PROPERTY.
OTHER SYMBOLS:
WARNINGS
Plug in power cord properly.
DO NOT operate or stop the unit by inserting or pull-
ing out the power plug directly from the wall.
DO NOT use a damaged power cord.
DO NOT modify power cord length or share the
outlet with other appliances.
DO NOT operate with wet hands or in
damp environment.
DO NOT direct airflow directly at room occupants.
Always ensure effective grounding.
DO NOT allow water to run into electric parts.
Always install circuit breaker and a dedicated
power circuit.
Always unplug the unit if strange sounds, smell or
smoke comes from the unit.
DO NOT use the socket if it is loose or damaged.
DO NOT open the unit during operation.
DO NOT use firearms near unit.
DO NOT use the power cord close to
heating appliances.
DO NOT disassemble, modify, or drill holes into
the air conditioner.
Ventilate room before operating air conditioner if
there is a gas leak from another appliance such as
a stove.
DO NOT use the power cord near flammable gas or
combustibles, such as gasoline, benzene, thinner, etc.
1
NEVER DO THIS.
Failure to do so may cause electric shock or fire due to
excess heat generation.
Doing so may cause electric shock or fire due to
heat generation.
Doing so may cause electric shock or fire. If the power
cord is damaged, it must be replaced by the manufactur-
er or an authorized service center or a similarly qualified
person in order to avoid a hazard.
Doing so may cause electric shock or fire due to
heat generation.
Doing so may cause electric shock.
This could cause health issues.
Incorrect grounding may cause electric shock.
Doing so may cause failure of machine or electric shock.
Incorrect installation may cause fire and electric shock.
Failure to do so may cause fire and electric shock.
Doing so may cause fire and electric shock.
Doing so may cause electric shock.
Doing so may cause fire.
Doing so may cause fire and electric shock.
Doing so may cause failure and electric shock and void
the manufacturer's warranty.
Failure to do so may cause explosion, fire and burns.
Doing so may cause an explosion or fire.
ALWAYS DO THIS.
Hide quick links:
Advertisement
