Advertisement
NORMAL SOUNDS
SOUND OF RUSHING AIR
At the front of the unit,
the sound of rushing air
being moved by the fan
may be heard.
GURGLE/HISS
"Gurgling" or "hissing"
noise may be heard due
to refrigerant passing
through evaporator during
normal operation.
NOTE: All of the pictures in this manual are for explanatory purposes only. The actual shape/look of
the air conditioner purchased may be slightly different, but the operations and functions are similar.
AIR CONDITIONER FEATURES
Thoroughly familiarize yourself with the control panel shown below and all of its functions. Afterwards, follow the
symbol for the functions you desire BEFORE operating the unit. This unit can be controlled by the unit control or the
remote control.
Remote Signal
Receptor
Auto
Low
Med
TEMP/TIMER
High
On
O
Follow
Me
Timer
Fan
Check
Energy
Saver
Filter
UNIT CONTROL PANEL
Heat indicator on models with
heating capabilities only.
HIGH PITCHED CHATTER
High efficiency compressors
may have a high pitched chatter
during the cooling cycle.
Auto
Cool
Dry
Heat
Fan
Mode
Sleep
VIBRATION
Unit may vibrate and make
noise because of poor wall or
window construction or incorrect
installation. This DOES NOT
indicate a defective unit.
TO TURN UNIT ON OR OFF:
Press
ON/OFF button to turn the unit on or off.
NOTE: The unit will automatically initiate the Energy Saver
function under COOL, DRY and AUTO (only AUTO-COOLING
and AUTO-FAN modes).
TO CHANGE TEMPERATURE SETTING:
Press / UP/DOWN buttons to change the
temperature setting.
NOTE: Press or hold either UP () or DOWN () button
until the desired temperature is seen on the display. The
temperature will be automatically maintained anywhere
between 62°F (17°C) and 86°F (30°C). If you want the display
to read the actual room temperature, see "To Operate on Fan
Only" section.
TO ADJUST FAN SPEEDS:
Press
to select the Fan Speed in four steps: Auto, Low,
Med or High. Each time the button is pressed, the fan speed
is shifted. In DRY mode, the fan speed is controlled at Low
automatically. For some models with heating capabilities, the
fan speed cannot be adjusted under HEAT mode.
PINGING OR SWITCHING
Droplets of water hitting
condenser during normal
operation may cause "pinging"
or "switching" sounds.
10
Hide quick links:
Advertisement
