Alcatel Linkhub HH40V User Manual page 12

Step 3: Setting.up.a.Wi-Fi.connection
•. Setting.up.a.Wi-Fi.connection.manually:
1). From.your.Wi-Fi.enabled.client,.perform.a.scan.for.wireless.networks.
2). Connect.to.the.network.name.that.matches.the.SSID.found.on.the.device.
label.
3). When.prompted.for.a.password,.enter.the.Wi-Fi.key.found.on.the.device.
label.(this.is.case.sensitive)..Your.client.will.notify.you.when.it.is.connected.
•. Setting.up.a.Wi-Fi.connection.through.WPS:
Your.client.must.support.WPS..There.are.3.ways.to.set.up.a.WPS.connection.
Option.1:.WPS.button
1). Ensure.that.Wi-Fi.is.enabled.on.the.client.and.enable.WPS.
2). Press.and.hold.the.WPS.button.for.3.seconds..The.Wi-Fi.LED.will.begin.to.
flash.blue.
3). Your.device.should.then.automatically.connect.
Option.2:.WPS.key
1). Enable.the.WPS.function.on.your.smart.device.(only.Android.devices.are.
supported).and.note.the.WPS.key.
2). Open.the.WPS.page.on.your.Web.User.Interface.(Go.to.Settings > Wi-Fi >
WPS).
3). Enter.the.WPS.key.on.the.WEB.User.Interface.and.click.Apply.
4). Your.device.should.then.connect.automatically.
XXXXXXXXX
10