Operating Your Atv - Marquis ATV-14 Owner's Manual

operating y o u r atv
PUMP PRIMING (Pr)
pump priming feature begins at startup. When your vessel is energized, the
LCD window displays a "pr" message. This mode lasts approximately four to
five minutes if not exited manually by pressing the TEMp+ pad.
Your vessel has been configured at the factory to run without any additional
programming changes other than setting the desired temperature. We do
however recommend that the time is set as this will be shown in the dis-
play as a convenience and aids in controlling when the vessel will filter. See
"changing the system settings" below on setting the time.
The vessel controls are state of the art and will retain all of the settings or
changes that have been made in the event of a power failure.