Table of Contents
Advertisement
OWNER'S MANUAL
WELCOME TO THE ULTIMATE HOT TUB EXPERIENCE!
We sincerely hope your spa life is a pleasant experience. If problems should arise, contact your
authorized Marquis
®
Email: service@marquiscorp.com
Web: www.marquisspas.com
Marquis Corp.
596 Hoffman Road
Independence, OR 97351, USA
This manual is provided to enhance your enjoyment of your spa and to prevent non-warranty sit-
uations. It is your sole responsibility to read, understand and comply with the instructions in the
owner's manual. Please save your original sales receipt for reference in case of a future warranty
claim. Failure to use, maintain or install the spa in compliance with this owner's manual could
result in loss of warranty coverage.
SERIAL NUMBER LOCATION
You will find the serial number on the tag in the equipment area.
PLEASE FILL OUT AND KEEP FOR FUTURE REFERENCE
Name of Purchaser_______________________________________________________
Date of Purchase ________________________________________________________
Address _________________________________________________________________
City _________________________________State _________Zip Code ____________
Telephone ______________________________________________________________
Spa Model/Color ________________________________________________________
Spa Serial # _____________________________________________________________
Pack Serial # ____________________________________________________________
Dealer's Name __________________________________________________________
Dealer's Address ________________________________________________________
City ____________________________________State_______Zip Code_____________
Telephone _______________________________________________________________
Every effort has been made to ensure the accuracy of this manual. However, Marquis
right to improve its product without notice. This could create a minor variation between this manual
and the actual product you receive. We apologize for any inconvenience this may cause.
dealer. Or contact Marquis Corp. at any of the following:
reserves the
®
1
Advertisement
Table of Contents
Related Manuals for Marquis Crown Summit
Summary of Contents for Marquis Crown Summit
- Page 1 Dealer’s Address ________________________________________________________ City ____________________________________State_______Zip Code_____________ Telephone _______________________________________________________________ Every effort has been made to ensure the accuracy of this manual. However, Marquis reserves the ® right to improve its product without notice. This could create a minor variation between this manual...
-
Page 2: Table Of Contents
All Spa Models ......................... 3-5 Personal Safety ........................6-7 • INSTALLATION INSTRUCTIONS Location ........................... 8-9 Filter Cartridges ........................10 Electrical Requirements ......................11-12 • STARTING YOUR HOT TUB......................13-15 • MARQUIS HOT TUB MODELS ® Summit............................. 16-17 Resort............................18-19 Spirit............................20-21 • MARQUIS SPA CONTROL OPERATION ®... -
Page 3: Important Safety Instructions
SAFETY INSTRUCTIONS The following instructions contain important safety information. We strongly encourage you to read and apply them. IMPORTANT SAFETY INSTRUCTIONS WHEN INSTALLING AND USING THIS ELECTRICAL EQUIPMENT, BASIC SAFETY PRE- CAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ AND FOLLOW ALL INSTRUCTIONS 2. - Page 4 Children must not be allowed to climb onto the spa cover. All Marquis spas are equipped with a locking cover that meets the ASTM F1346-91 Standard for Safety Covers. Always lock the child resistant locks after using the spa for your children’s...
- Page 5 SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS. WARNING: Do not permit electric appliances (such as a light, telephone, radio, or television) within five feet (1.52m) of the spa or hot tub. WARNING: Children should not use spas or hot tubs without adult supervision. WARNING: Do not use spas or hot tubs unless all suction guard(s) are installed to prevent body and hair entrapment.
-
Page 6: Personal Safety
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS FOR FRENCH SPEAKING SPA OWNERS AVERTISSEMENT: Ne pas placer d’appareil électrique (luminaire, téléphone, radio, téléviseur, etc.) moins de 1.52 m de cette cuve de relaxation. AVERTISSEMENT: Ne pas laisser les enfants utiliser une cuve de relaxation sans surveillance. AVERTISSEMENT: Pour éviter que les cheveux ou une partie du corps puissent être aspirés, ne pas utiliser une cuve de relaxation si les grilles de prise d’aspiration ne sont pas toutes en place. - Page 7 SAFETY INSTRUCTIONS WARNING: The use of alcohol, drugs, or medication can greatly increase the risk of fatal hyper- thermia in hot tubs and spas. Persons taking medications which induce drowsiness such as tranquilizers, antihistamines, or anticoagulants should not use the spa. Pregnant women and persons with a medical history of heart disease, diabetes, or high blood pressure should consult a physician before using the spa.
-
Page 8: Location
Access is essential and must allow adequate room for service. To facilitate repairs, Marquis Corp. or its agent may require access to spa equipment. It is your responsibility to provide unencumbered access. - Page 9 INSTALLATION OUTDOOR AND PATIO INSTALLATION To install the spa outdoors, we recommend a reinforced concrete pad at least four inches thick. The reinforcing material should be attached to a #8 AWG (6AWG for Canada) bonding wire per national and local electrical code. If you place the spa on the ground, even temporarily, place the spa empty of water on concrete pavers under the entire bottom of the spa.
-
Page 10: Filter Cartridges
SHUT-OFF VALVES Your spa is equipped with shut-off valves (see EQUIPMENT DIAGRAM) that shut off the water flow to the equipment system for authorized Marquis dealer service. At times, a new spa or one that has recently ® been serviced, may have the shut-off valves partially closed which can restrict the water flow and hinder jet performance. -
Page 11: Electrical Requirements
INSTALLATION SUCTION GUARDS The suction guard(s) in the footwell of your spa is an opening through which the jet pump(s) draws water. The suction fittings have an inte- grated vacuum release built into them. In the event that a suction fitting gets blocked, air will be induced causing the pump to cavitate and the water flow interrupted. - Page 12 Green (ground) wire routed through plastic enclosure and secured to exterior bonding lug. Improperly wired spas are beyond Marquis Corp. control and are not covered under the warranty. Other items beyond Marquis Corp. control include, but are not limited to, damage resulting from: improper connections;...
-
Page 13: Starting Your Hot Tub
INSTALLATION STARTUP PROCEDURE Your spa is equipped with solid-state Comfort Controls specific to your spa model. (See SPA CONTROL OPERATION for your specific spa model.) NOTE: Your spa has been filled and test-run at the factory. The first time your spa is filled with water, some discoloration from residual test water may appear. - Page 14 (See SPA CONTROL OPER- ATION.) It takes up to 24 hours to heat the water to desired temperature depending on the water temperature and voltage of your spa. Test the water for the proper chemical balance and adjust as necessary. Marquis SpaCare ®...
- Page 15 Spa covers do not qualify for labor coverage under the warranty. These parts may be purchased or exchanged under warranty at your authorized Marquis Dealer.
-
Page 16: Summit
2021 SUMMIT SUMMIT 3-4-21 2g 2g 2g 2g 4c 4c NOTES: -LIGHTS IN DFC VALVE WITH JEWEL LIGHTING OPTION ONLY Component Identification Qty. -LIGHTS IN WATER FEATURES ALWAYS In-line Fitting Reference # Fitting Description Holesaw size Frog (Gray Boomerang) 1 3/16" Ozone Fitting Ozone (Grey Boomerang) 1 3/16"... - Page 17 SUMMIT THERAPY ZONES ZONE 1 ZONE 4 ZONE 3 HK20 HK20 ZONE 2 H.O.T. ZONE REGAL THERAPY JETS...
- Page 18 2021 RESORT RESORT 2-24-21 NOTES: Component Identification Qty. -LIGHTS IN DFC VALVES ONLY WITH JEWEL LIGHTING OPTION -LIGHTS IN WATER FEATURES ALWAYS In-line Fitting Reference # Fitting Description Holesaw size Ozone Fitting Frog (Gray Boomerang) 1 3/16" Ozone (Grey Boomerang) 1 3/16"...
-
Page 19: Resort
RESORT THERAPY ZONES RESORT THERAPY ZONES ZONE 2 ZONE 3 ZONE 2 ZONE 1 *Neck jets operate in all zones. - Page 20 2021 SPIRIT SPIRIT 11-16-20 Reference # Fitting Description Holesaw size Frog (Gray Boomerang) 1 3/16" Component Identification Qty. Ozone (Grey Boomerang) 1 3/16" 200 Regal Jet 1 1/2" In-line Fitting straight Ozone Fitting HK40 RKJ 20 Target Touch 400 Regal Jet 2 5/8"...
-
Page 21: Spirit
SPIRIT THERAPY ZONES SPIRIT Therapy Control Zone Diagram Zone 1 Zone 2... -
Page 22: Marquis ® Spa Control Operation All Models
HOT TUB CONTROLS MAIN SCREEN ICONS A. Display off button: Touch this to turn off the display at any time. B. Heat Mode: R = Ready IR = Rest C. Ozone: If O3 is being displayed, ozone is on. If it is not being displayed, it is off. D. - Page 23 HOT TUB CONTROLS SETTING THE TIME OF DAY To access the screen to set the time of day, please follow these steps. Note: If you need to go back to a previous screen, touch the back arrow. 1. On the home screen, touch the Settings icon located on the bottom of the display 2.
- Page 24 HOT TUB CONTROLS SET THE TEMPERATURE In this example we will set the Set Temperature to 102°F (39°C). • Press the water temperature display button (A) to make the temperature menu appear (B). The center box with the arrow (C) indicates the current Set Temperature. •...
- Page 25 HOT TUB CONTROLS SETTING FILTRATION CYCLES Should you want to change your factory default filtration settings, see the instructions below. The factory default settings are for two filtration cycles per day for 1.0 hour per cycle. The first cycle with start at 8:00 PM and the second cycle will start at 8:00 AM. NOTE: If you need to go back to a previous screen, touch the back arrow.
- Page 26 HOT TUB CONTROLS SETTING THE UNITS Features found in the Units screen allow for changing how the temperature scale and time are displayed on the home screen. To access the screen to make these changes, please follow these instructions On the home screen, touch the Settings icon located on the bottom of the display Touch the Units button To change the temperature display from Fahrenheit...
- Page 27 HOT TUB CONTROLS TURNING ON REMINDERS Reminders can be helpful to automatically notify you when general maintenance items needs to be checked. Because usage patterns can vary widely from one owner to another, the reminders are turned off by default. Below is a list of reminders that will become active if turned on. •...
- Page 28 HOT TUB CONTROLS SETTING THE LANGUAGE The control panel is able to display the following languages • English (Factory Default) • Spanish • German • French • Swedish To access the screen to make any changes, please follow these instructions. On the home screen, touch the Settings icon located on the bottom of the display Touch the Language button...
- Page 29 HOT TUB CONTROLS SETTING THE PANEL DISPLAY You can make changes to how long the panel stays illuminated as well as altering the user control sequence for waking the panel up. To access the screen to make any changes, please follow these instructions.
- Page 30 HOT TUB CONTROLS VIEWING DIAGNOSTICS This feature can be useful when reviewing system information or any fault codes or occurrences that may have happened during operation. Addtionally you can run periodic GFCI tests to ensure the electrical supply system is operating properly. To access this feature, please follow these instructions.
- Page 31 HOT TUB CONTROLS Jets 2: If equipped, touching this button once will turn on to low speed. You will know it is on when a white ring around the button is present. Touching the button a second time will turn the pump on to high speed. You will see the internal jet bubble icon increase in size.
- Page 32 HOT TUB CONTROLS JEWEL LIGHTING CONTROLS (OPTIONAL) ™ Jewel Lighting is an optional feature that allows for expanded control of the interior lighting and added exterior cabinet light control. To access this feature, please follow these instructions. On the home screen, touch the Settings icon located on the bottom of the display to access the light control screen.
-
Page 33: Messages
HOT TUB CONTROLS MESSAGE BUTTONS Message buttons provide reminders to help you keep your spa running smoothly. Message buttons also provide warning information that helps spa technicians with troubleshooting. When a message button appears (C), press it to view the corresponding message (D) or (G). - Page 34 HOT TUB CONTROLS HEATER-RELATED MESSAGES The water flow is low – M016** There may not be enough water flow through the heater to carry the heat away from the heating element. Heater start up will begin again after about 1 minute. See “Flow Related Checks” below. The water flow has failed* –...
- Page 35 HOT TUB CONTROLS SYSTEM-RELATED MESSAGES Program memory failure* – M022** At Power-Up, the system has failed the Program Checksum Test. This indicates a problem with the firmware (operation program) and requires a service call. The settings have been reset. (Persistent Memory Error)* – M021** Contact your dealer or service organization if this message appears on more than one power-up.
- Page 36 HOT TUB CONTROLS Change the water May appear on a regular schedule, i.e. every 90 days. Change the water in the spa on regular ba- sis to maintain proper chemical balance and sanitary conditions. You may want to set a reminder to purge, drain and fill your hot tub every 90 days to avoid total dissolved solids buildup in your water which can render your sanitizer ineffective.
-
Page 37: Summit
HOT TUB EQUIPMENT SUMMIT MicroSilk Option Component Quantity Control Box and Heater Ozonator Pumps MicroSilk pump (option) ® Shut Off Valves Drain Valve MicroSilk shut off valve (option) Jewel LED Control (option) ™ Power Supply (option) Bluetooth Audio (option) ControlMySpa Module (option) ™... -
Page 38: Resort
HOT TUB EQUIPMENT RESORT Auxiliary Pump location on left MicroSilk Pump location on right side of spa when standing at the control panel side of spa when standing at the control panel Component Quantity Control Box and Heater Ozonator 4-A Pump 4-B Pump MicroSilk pump (option) -
Page 39: Spirit
HOT TUB EQUIPMENT SPIRIT Component Quantity Control Box and Heater Ozonator Pump MicroSilk pump (option) ® Shut Off Valves Drain Valve MicroSilk shut off valves (option) Jewel LED Control (option) ™ Power Supply (option) Bluetooth Audio (option) ControlMySpa Module (option) ™... -
Page 40: Maintenance All Models
MAINTENANCE HOW TO PROLONG THE LIFE OF YOUR HOT TUB Please follow the guidelines listed below to ensure the most trouble free and enjoyable use of your spa. Rinse your feet Please remember to rinse your feet before getting into the hot tub. This will help prevent sand and dirt from entering the plumbing system where it can clog valves and filters. - Page 41 CAUTION: Overtightening of the filter can cause the filter or filter housing to crack. Tighten filter until it is just snug. NOTE: Filters and filter lids do not qualify for labor coverage. These parts can be purchased or exchanged under warranty at your authorized Marquis dealer. ®...
- Page 42 Once the spa is drained, clean the DuraShell interior thoroughly – especially at the water line. We suggest the Glove Sponge to clean without scratching. Marquis Gloss & Guard or Spa Brite is the recommended cleaning agent for DuraShell – other ®...
- Page 43 MAINTENANCE NOTE: Due to the high-gloss, fine finish of the acrylics, imperfections in the surface texture may occur. A natural aging process in acrylic can lead to a process called crazing. Fine spider web- like lines can form on the cosmetic surface of acrylic over time after exposure to the elements and chemicals.
- Page 44 MAINTENANCE Cushioned Headrest Care To increase the life of your cushioned headrest, remove and replace them with care only when necessary. Remove Cushioned Headrest Slip your fingers under each end of the interior cushioned headrest part and gently pull straight towards you.
- Page 45 MAINTENANCE VACATION CARE INSTRUCTIONS Short time periods: 3-5 days 1. Adjust the pH (see WATER CARE). 2. Sanitize the water by following the shock procedures (See WATER CARE). 3. Lock your spa cover in place with cover locks. 4. Upon return, shock sanitize water. Long time periods: 5-14 days 1.
-
Page 46: Spa Care And Enjoyment Guide All Models
® CAUTION: Damage to the spa surface and equipment due to the use of trichlor chlorine, or other harsh chemicals not recommended by Marquis is not covered under warranty. WATER CARE There are three things necessary for clean safe water: 1. - Page 47 Gaskets and seals are not ® covered under the warranty. The control system in your Marquis spa will automatically circulate and filter. (See SPA CONTROL OPERATION, ConstantClean™ and SmartClean™ sections.) The sanitation requires minimal effort if done consistently and properly.
- Page 48 SPA CARE Calcium Hardness Do not use soft water in your spa. It is critical to have calcium in your water. The ideal range of calcium is between 150 – 250 ppm. The calcium hardness is normally adjusted when filling or refilling after draining the spa.
- Page 49 SPA CARE SANITIZE ConstantClean+ System ™ The ConstantClean+ system utilizes a combination of sanitizers to increase water quality and significantly decrease maintenance. The combination of a In-Line Mineral Cartridge* and the factory installed ozonator greatly reduce the amount of sanitizer required. Instead of the normal 3 - 5 ppm of bromine, you may only need to maintain 1 - 2 ppm of bromine.
- Page 50 Cartridge holder is warranted to be free from defects at time of delivery of spa. Chemical cartridge holders do not qualify for labor coverage. These parts can be purchased or exchanged under warranty at your authorized Marquis dealer.
- Page 51 Water Clarifier Microscopic particles can pass through the spa filter and create cloudy water. The use of Marquis Water Clarifier combines these microscopic particles into larger particles that can be trapped in the filter to clear cloudy water.
- Page 52 SPA CARE WATER CARE TROUBLESHOOTING GUIDE NOTE: If you request a service call and no problem is found with the spa or the problem is not covered by warranty (i.e. chemical damage), you will be charged at the regular service rate. P: Problem S: Solution Cloudy Water...
- Page 53 SPA CARE No Sanitizer Reading P: Sanitizer level is too low. S: Shock and/or adjust sanitizer cartridge until the sanitizer registers in the recommended range. P: Test strip remains “white” even after sanitizer has been added. S: Sanitizer level could be extremely high. It can bleach the reagents on the test strip and give a false reading.
-
Page 54: Environments ™ Step Assembly Instructions
SPA CARE ENVIRONMENTS STEP INSTALLATION (OPTION) ™ The step and mounting brackets may be placed along a straight side of the spa, most often centered to the entry location. Find the center of the spa side where you want to mount the step. -
Page 55: Marquis ® Owner's Protection Plan
WHAT THE What the Marquis Corp. Limited Warranty Covers MARQUIS CORP. LIMITED Marquis Corp. warrants that our products will be free from WARRANTY COVERS defects in materials and workmanship for the term set forth exclusively in this warranty. Accessories purchased from Marquis Corp. - Page 56 To facilitate repairs, Marquis Corp. or its agent may require access to spa equipment. It is your responsibility to provide unencumbered access.
- Page 57 Your sole and exclusive remedy and Marquis Corp.’s entire liability in connection with manufac- ture and sales of its spa products is repair or replacement (at Marquis’ option) of a defective part, as expressed in the limited warranty. Any other express or implied representation or warranty, including the implied warranties of merchantability and of fitness for a particular purpose as well as non-infringement, is excluded to the maximum extent permitted by law.
Need help?
Do you have a question about the Crown Summit and is the answer not in the manual?
Questions and answers
shut off microsilk pemanently. VERY LOUND NOICE keeping neighbors up at night!
To permanently shut off the MicroSilk® feature on a Marquis Crown Summit hot tub, you can manually turn it off by touching the MicroSilk button. This will stop the feature and allow control of other pumps to resume. However, if you want to disable it permanently to reduce noise, you may need to disconnect its power source or consult the manufacturer or a qualified technician to modify the system safely.
This answer is automatically generated