Vanco Spot for Dot Installation Manual

Designed by Jimmy Thu LLC
Manufactured in China for
VANCO International
Batavia, IL 60510 USA
Spot for Dot Installation Guide.indd 1
SPECIFICATIONS
AMP 25W x 2 (RMS @ 8Ω),
Amp Power Output:
40W x 2 (RMS @ 4Ω)
Speaker Terminal: 4-Pin Screw Terminal Connector
Variable Audio Input: 3.5mm Stereo Jack
Audio Input Formats: Analog
Total Harmonic Distortion (THD): Less than 1%
Signal to Noise: Dot input 91db AUX input 101db
Frequency Response: 20-20khz +- 1db
Adjustable Volume: Fixed (requires variable audio source)
Dot: 410mV
Line Level Input Sensitivity:
AUX 652mV
POWER
Amperage 15a
Voltage 110v-240v
Certifications: ETL, cETL, CE, FCC, PSE, RCM, & RoHS
Termination: 3-Wire Screw down
Grounding: Yes
OTHER
Dimension (WxDxH): 5" x 5" x 4"
www.vanco1.com
Weight: 1.31 lbs
©2018
Amazon, Alexa, Echo Dot and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
LIMITED WARRANTY LIABILITY STATEMENT
With the exceptions noted in the next Every effort has been made to ensure that this
paragraph, Vanco warrants to the original product is free of defects. The manufacturer
purchaser that the equipment it manufactures of this product cannot be held liable for the
or sells will be free from defects in materials use of this hardware or any direct or indirect
and workmanship for a period of two years consequential damages arising from its use. It
from the date of purchase. Should this product, is the responsibility of the user and installer of
in Vanco's opinion, prove defective within this the hardware to check that it is suitable for their
warranty period, Vanco, at its option, will repair requirements and that it is installed correctly.
or replace this product without charge. Any All rights are reserved. No parts of this manual
defective parts replaced become the property may be reproduced or transmitted by any form
of Vanco. This warranty does not apply to or means electronic or mechanical, including
those products which have been damaged photocopying, recording or by any information
due to accident, unauthorized alterations, storage or retrieval system without the written
improper repair, modifications, inadequate consent of the publisher. Manufacturer
maintenance and care, or use in any manner reserves the right to revise any of its hardware
for which the product was not originally and software following its policy to modify and/
intended. Items integrated into Vanco products or improve its products where necessary or
that are made by other manufacturers, notably desirable. This statement does not affect the
computer hard drives and liquid crystal display legal rights of the user in any way.
panels, are limited to the term of the warranty
offered by the respective manufacturers. Such
specific warranties are available upon request
to Vanco. A surge protector, power conditioner
unit, or an uninterruptible power supply must
be installed in the electrical circuit to protect
against power surges. If repairs are needed
during the warranty period the purchaser will
be required to provide a sales receipt/sales
invoice or other acceptable proof of purchase
to the seller of this equipment. The seller will
then contact Vanco regarding warranty repair
or replacement.
INSTALLATION GUIDE
7/27/18 5:19 PM